GE IS220PSVOH1B PSVO伺服控制模块

IS220PSVOH1B  伺服控制包

产品描述
IS220PSVOH1A作为伺服控制包。该组件由GE为其Mark VI或Mark VIe系统制造。这两个系统都用于控制蒸汽和燃气轮机系统。

IS220PSVOH1A提供一个或两个I/O以太网网络和TSVO伺服终端板之间的电接口。IS220PSVOH1A使用WSVO伺服驱动模块来处理两个伺服阀位置回路。PSVO有一个带有多个LED指示灯的前面板。其中包括四个LED，指示两个以太网网络(ENet1/Enet2)的状态，以及一个电源和Attn LED，以及另外两个标有ENA1/2的LED。正面也有一个单一的红外端口，这是不使用在这个包。

IS220PSVOH1A在安装后配置了控制系统工具箱应用程序。该包包括一个带有输入电源连接器的处理器板，本地电源和用于温度监测的内部传感器。该板还具有闪存和RAM板上。该板连接采集板。

IS220PSVOH1A可以在更换时自动重新配置。此选项通过ToolboxST应用程序通过组件编辑器启用/禁用。如果需要，组件编辑器还允许操作员手动重新配置模块。当更换终端板时，需要手动重新配置I/O包。

Product Description
The IS220PSVOH1A functions as a Servo Control pack.   This component is made by GE for their Mark VI or Mark VIe systems.   Both of these systems are used to control steam and gas turbine systems.

The IS220PSVOH1A provides the electrical interface between one or two I/O Ethernet networks and a TSVO servo terminal board.    The IS220PSVOH1A uses the WSVO servo driver module to handle two servo valve position loops.  The PSVO has a front faceplate with multiple LED indicators.   These include four LEDs that indicate that status of the two Ethernet networks (ENet1/Enet2), as well as a Power and Attn LED, and two others labeled ENA1/2.   The front also has a single infrared port, which is not used in this pack.

The IS220PSVOH1A is configured with the Control System Toolbox application after installation.   The pack includes a processor board with input power connectors, local power supplies, and an internal sensor for temperature monitoring.   The board also has flash memory and RAM onboard.  This board connects to an acquisition board.

The IS220PSVOH1A  can be auto-reconfigured when they are replaced.   This option is enabled/disabled through the ToolboxST application through the Component Editor.   The Component Editor also allows the operator to reconfigure the module manually if desired.  When a terminal board is replaced, the I/O pack must be manually reconfigured.

更换IS220PSVOH1A时可以自动重新配置。此选项通过组件编辑器通过 ToolboxST 应用程序启用/禁用。如果需要，组件编辑器还允许操作员手动重新配置模块。更换端子板时，必须手动重新配置 I/O 包。

伺服性能可以通过手动模式、位置斜坡或步进电流的行程来验证。趋势记录器将显示执行器行程中的任何异常。有关主板的此部分和其他部件、其安装和操作以及可能的兼容性问题的更多信息，请参阅制造商用户指南和手册。

厦门雄霸专注于欧美进口备件DCS/PLC/机器人/伺服
官网链接：www.xiongbagk.cn  
备件咨询#18059884797 何经理
公司主营品牌包括：ABB贝利、GE/FUANC、FOXBORO、英维思TRICONEX?、本特利BENTLY、艾默生EMERSON?、横河、NI、A-B罗克韦尔、霍尼韦尔HONEYWELL?、伍德沃德WOODWARD、MOTOROLA、XYVOM、力士乐REXROTH、KUKA、DEIF、瑞恩RELIANCE、施耐德SCHNEIDER?、安川、?穆格MOOG、PROSOFT...