Allen-Bradley MPL- b540d - mj24aa MPL系列伺服电机是一种无刷伺服电机。它与Allen-Bradley Kinetix伺服驱动器结合使用，用于工业应用，如包装，转换和物料处理应用。该伺服电机的环境规格包括0至40摄氏度的工作温度范围，-30至70摄氏度的存储温度范围，以及5%至95%的非冷凝相对湿度范围，用于操作和存储。MPL-B540D-MJ24AA伺服电机上的绕组是400伏交流电压等级的一部分。大和额定电机速度都是2000 RPM。MPL-B540D-MJ24AA伺服电机输出功率为3.4千瓦。持续失速电流为10.5安培，峰值失速电流为23安培。持续失速力矩为19.4 N-m，峰值失速力矩为41 N-m。
Allen-Bradley MPL- b540d - mj24aa MPL系列无刷伺服电机的机架尺寸为165毫米，磁体堆叠长度为101.6毫米或4英寸。MPL-B540D-MJ24AA伺服电机通过支持Hiperface协议的集成1024 sin/cos多转编码器向连接的伺服驱动器提供反馈。MPL-B540D-MJ24AA伺服电机上的轴有轴键，但没有轴封。电机上的卡口连接器面向电机轴。电机上的另一个功能是保持制动，该制动设计用于从单独电源获得24伏直流电压的操作。MPL-B540D-MJ24AA伺服电机安装完成后才能上电。正确安装电机和相关机械需要经过培训的经验，只能由受过培训的人员进行。
The Allen-Bradley MPL-B540D-MJ24AA MPL series servo motor is a brushless servo motor. It is used in combination with Allen-Bradley Kinetix servo drives for industrial applications such as packaging, converting, and material handling applications. The environmental specifications for this servo motor include a 0 to 40 degrees Celsius working temperature range, a -30 to 70 degrees Celsius storage temperature range, and a 5 to 95% non-condensing relative humidity range for operation and storage. The winding on the MPL-B540D-MJ24AA servo motor is part of the 400 Volts AC voltage class. The maximum and rated motor speeds are both 2000 RPM. The output power delivered by the MPL-B540D-MJ24AA servo motor is 3.4 kilowatts. The continuous stall current is 10.5 Amps and the peak stall current is 23 Amps. Additionally, the continuous stall torque is 19.4 N-m and the peak stall torque is 41 N-m.
The frame size of the Allen-Bradley MPL-B540D-MJ24AA MPL series brushless servo motor is 165 millimeters and the magnet stack length is 101.6 millimeters or 4 inches. The MPL-B540D-MJ24AA servo motor provides feedback to the connected servo drive from an integrated 1024 sin/cos multi-turn encoder with support for the Hiperface protocol. The shaft on the MPL-B540D-MJ24AA servo motor has a shaft key but no shaft seal. The bayonet connector on the motor faces the motor shaft. Another feature that is available on the motor is a holding brake which is designed for operation with 24 Volts DC voltage from a separate power source. The MPL-B540D-MJ24AA servo motor should only be powered on after it has been mounted. The proper installation of the motor and associated machinery requires training experience and it should be carried out by trained personnel only.
其他型号推荐： | DS200DCTBG1B GE接触器驱动板 | hmv01.1.1 r - w0018 - a -07- fnn1力士乐HMV系列电源器件 |
| if8i Allen Bradley ControlLogix模拟输入模块 | 810-082745-003 LAM plc /机器控制 |
| 8 msa3l。R0-30贝加莱伺服电机 | 用于交流测量的TAP-210DG/3 DEIF换能器 |
| BINT-12C ABB接口板 | FANUC驱动放大器 |
| 1769-L33ERMS艾伦布拉德利5570紧凑型GuardLogix控制器 | 2080-LC50-48QWB Allen Bradley Micro 850逻辑控制器 |
| Allen-Bradley PowerFlex 753交流驱动器 | 2085-IF8 Allen Bradley扩展I/O模块 |
| 横河模拟输入模块 | IT8000E系列-称重端子 |
| 1756-ENT2R艾伦布拉德利以太网通信模块 | IC670ALG230 GE 8点模拟电流源输入模块 |
| MPL- b430p - mk74aa Allen-Bradley Kinetix MPL低惯量伺服电机 | IC670ALG330 GE 8点模拟电流源输出模块 |
| MHD115C-058-PG1-BA力士乐同步电机 | th300 - e1 - h ABB头戴式温度变送器 |
| SCE903AN-002-01太平洋科学高性能数字伺服驱动器 | MS-NAE5510-2强生MS-NAE系列网络层控制器 |
扫一扫咨询微信客服
