DS200FGPAG1A GE 门脉冲放大器板

DS200FGPAG1A   GE    门脉冲放大器板

DS200FGPAG1A是一款由GE生产的门脉冲放大器板，专为需要精 确可靠的门脉冲放大的应用场合设计。以下是关于DS200FGPAG1A的详细介绍：

1. 产品特点：

• 高精度放大：该板能够精 确放大脉冲信号，以满足工业系统中对信号强度和质量的严格要求。
• 宽输入电压范围：DS200FGPAG1A支持的输入电压范围为115~230 VAC，允许范围扩展至90~260 VAC，使其能在不同的电源环境下稳定工作。
• 宽工作频率范围：其工作频率范围为50~60 Hz，允许范围扩展至47~63 Hz，能适应多种不同的工业应用场景。
• 供电故障保护：在供电故障情况下，超过20毫秒后，该板会自动转入安全模式，保护系统免受潜在损害。
• 保险措施：DS200FGPAG1A使用玻璃保险，额定值为2.5 AT，接在输入端，为设备提供了额外的安全保障。

2. 主要功能：

• SCR状态监控：从连接的FHVAs积累电池电压信息，并通过光学串行数据链路将信息传递给LCI控制器。
• 开关电源：将接收到的交流电压转换为门控和状态功能所需的DC电压。
• 栅极驱动器：为SCR桥的一相提供任何栅极电源。

3. 在线诊断与警报：

• 一旦通电测试完成，机组将开始控制并在线提供警报和停机指示。
• 离散输出将打开，指示关闭或警报状态。
• 单独停机和报警条件可以通过can或RS-232通信链路进行监测。
• LED闪烁代码可用于识别由检测到的停机条件引起的故障。

DS200FGPAG1A门脉冲放大器板适用于各种工业自动化和控制系统，其精 确可靠的门脉冲放大功能以及丰富的保护功能使得它在工业应用中具有广泛的应用前景。如需更多关于DS200FGPAG1A的信息，建议查阅产品手册、技术文档或联系制造商的客户支持部门。

The DS200FGPAG1A is a gate pulse amplifier board from GE designed for applications that require accurate and reliable gate pulse amplification. The following is a detailed introduction to the DS200FGPAG1A:

Product features:
High-precision amplification: The board is capable of accurately amplifying pulse signals to meet the stringent requirements for signal strength and quality in industrial systems.
Wide input voltage range: The DS200FGPAG1A supports an input voltage range of 115 to 230 VAC, allowing the range to be extended to 90 to 260 VAC, making it stable in different power supply environments.
Wide operating frequency range: Its operating frequency range is 50~60 Hz, allowing the range to expand to 47~63 Hz, can adapt to a variety of different industrial application scenarios.
Power failure protection: In the event of a power failure, the board automatically switches to safe mode after more than 20 milliseconds, protecting the system from potential damage.
Safety Measures: The DS200FGPAG1A uses a glass safety with a rating of 2.5AT and is connected to the input to provide additional security for the device.

Main functions:
SCR condition monitoring: Accumulates battery voltage information from the connected FHVAs and passes the information to the LCI controller via an optical serial data link.
Switching power supply: Converts the received AC voltage to the DC voltage required for gated and status functions.
Gate driver: Provides any gate power to one phase of the SCR bridge.

Online Diagnosis and Alert:
Once the power-on test is complete, the unit will take control and provide alerts and shutdown instructions online.
The discrete output will open, indicating a closed or alert status.
Individual shutdowns and alarm conditions can be monitored via CAN or RS-232 communication links.
LED flashing codes can be used to identify faults caused by detected downtime conditions.
DS200FGPAG1A gate pulse amplifier board is suitable for various industrial automation and control systems. Its precise and reliable gate pulse amplification function and rich protection function make it have a wide application prospect in industrial applications.

其他型号推荐：